Connecting A Computer - Samsung SyncMaster 400CX User Manual
40" 400cx lcd professional display
Hide thumbs
Also See for SyncMaster 400CX:
- Quick start manual (25 pages) ,
- User manual (151 pages) ,
- Control protocol (90 pages)
Table of Contents
Advertisement
Connections
Connecting a Computer
Using a Power cord with Earth
•
In the event of failure, the earth lead may cause electric shock. Make sure to
wire the earth lead in correctly, before connecting the AC power. When un-
wiring the earth lead, make sure to disconnect the AC power in advance.
Note
AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected
to the LCD Display. For detailed information on connecting AV input devices, refer to the contents
under Adjusting Your LCD Display.
Connect the power cord for your LCD Display to the power port on the back of
the LCD Display. Trun on the power switch.
There are 2 ways to connect the D-sub to your LCD Display. Choose one of the
following:
•
Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display
and the 15 pin D-sub Port on the computer.
•
Connect the DVI Cable to the DVI(HDCP) port on the back of your LCD
Display and the DVI port on the computer.
Using the D-sub (Analog) connector on the video card.
Using the DVI (Digital) connector on the video card.
Hide quick links:
Advertisement
Table of Contents
