Time And Status Display - LG WD205C Series How To Use

18
HOW TO USE

TIME AND STATUS DISPLAY

The time and status display shows the estimated time remaining and cycle progress.
A
DRAWER LOCK INDICATOR
The DRAWER LOCK indicator will illumi-
nate once a cycle has started. The indi-
cator light will stay on until the cycle is
paused, stopped or has finished.
B
CHILD LOCK
When the Child Lock function is ac-
tivated, the LED lights up. When the
Child Lock function is set, except for the
POWER button, the other functions are
disabled. Once the Child Lock function is
disabled, the LED will turn off.
C
CYCLE STATUS INDICATOR
These LEDs will illuminate when a cycle
is selected to indicate which stages will
run. When a cycle is running, the LED for
the active stage will blink, and the LEDs
for the remaining stages will remain
steady. Once a stage is complete, the
LED will turn off. If a cycle is paused, the
active stage LED will stop blinking.
A E B
D C
A B
D C
D
ESTIMATED TIME REMAINING
When a cycle is selected, the default
time for that cycle is displayed. This time
will change as modifiers or options are
selected.
NOTE: The time shown is only an esti-
mate. This time is based on normal oper-
ating conditions. Several external factors
(load size, room temperature, incoming
water temperature, water pressure, etc.)
can affect the actual time.
E
LID OPEN
If the lid is open, the LED blinks. Close
the lid, shut the drawer, and press
START/PAUSE to start the cycle. Some
models do not have the LID OPEN indi-
cator. If the lid is closed and the lid error
message is displayed, call for service.