Advertisement
Registering your phone
A cordless handset will not operate until it is
registered to the base.
Once you have unboxed and plugged in your
Motorola ML25055 phone it will be ready to register
to the Motorola ML25254 or the corded base of
Motorola ML25255 system.
During the registration process, keep the handset
near the base. Up to 10 cordless handsets (in total)
can be registered to one base.
To register your Motorola ML25055 handset:
1.
If a handset has not been registered to the
base, the display will show
INITIATE REGISTRATION
been activated. Press
registration.
If the handset does not display the
"REG" TO INITIATE REGISTRATION
REGISTER
the
SETTINGS - REGISTRATION
In idle mode, press Menu/Flash (on cordless
•
handset) to go to the main menu.
Using VOL + and VOL - of the navigation
•
button to scroll to
SELECT
Using VOL + and VOL - of the navigation
•
button to scroll to REGISTRATION. Press
SELECT
Using VOL + and VOL - of the navigation
•
button to scroll to REGISTER. Press
softkey.
2. The handset will display
BUTTON UNTIL
3. Press and hold PAGE button on the base for
about 3 seconds.
4. The base will display
the base is now in registration mode.
5. If registration is successful, both phones will
beep and display
registration is not successful, move the phones
closer together and try again.
NOTE
Your Motorola ML25055 cordless handset accessory
is also compatible with ML25212, ML25252 and
ML25260 systems.
option is available in the
softkey.
softkey.
BEEP.
REGISTERING...
REGISTRATION COMPLETE!
PRESS "REG" TO
once the handset has
REG
softkey to start the
menu.
PHONE
SETTINGS. Press
PRESS BASE UNIT PAGE
PRESS
message,
PHONE
SELECT
to indicate
If
Advertisement
