Fluke 106 User Manual page 369

•
Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
•
Use only specified replacement parts.
•
Use only specified replacement fuses.
•
Limit operation to the specified measurement category, voltage, or amperage
ratings.
•
Do not use test leads if they are damaged. Examine the test leads for damaged
insulation and measure a known voltage.
•
Do not use in CAT III or CAT IV environments without the protective cap
installed. The protective cap decreases the exposed probe metal to <4 mm.
This decreases the possibility of arc flash from short circuits.
Digital Multimeters
Safety Information
5