Mp3-Cd Playback - Samsung HT-DM140 Instruction Manual

Digital home theater system
Table of Contents

Advertisement

MP3-CD Playback

This system has a built-in MP3 decoder.
You can play back MP3 tracks (files)recorded on CD-Rs, CD-RWs, and CD-ROMs.
What is MP3?
MP3 is an abbreviation of Motion Picture Experts Group (or MPEG) Audio Layer 3.
MP3 is simply a file format with a data compression ratio of 1:10 (128 Kbps*). That means,by using MP3
format, one CD-R or CD-RW can contain 10 times as much data volume as a regular CD.
Starting Playback
It is recommended you turn on your TV when playing back an MP3-CD.
1
Press the Open/Close(
) button
to load a disc.
2
Press the Play/Pause(
) button.
After detecting the disc, playback starts.
The on-screen bar and the contents
recorded on the MP3-CD will be shown
on the TV if it is turned on.
To stop during playback
Press the Stop ( ) button.
CD-R MP3 DISC
• Only CD-R discs with MP3 files in ISO 9660 or Joliet format can be played.
• The file name of the MP3 file may not be longer than 8 characters and should contain no blank spaces or special
characters.
• Use discs recorded with a compression/decompression data rate greater than 128Kbps.
• Only files with the ".mp3" and ".MP3" extensions can be played.
• Only a consecutively written Multisession disc can be played. If there is a blank segment in the Multisession disc,
the disc can be played only up to the blank segment.
• If the disc is not closed, it will take longer to begin playback and not all of the recorded files may be played.
• For files encoded in Variable Bit Rate (VBR) format, i.e. files encoded in both low bit rate and high bit rate (e.g.,
32Kbps ~ 320Kbps), the sound may skip during playback.
17
Depending on the recording mode, some MP3-CDs cannot be played.
Operations Using the On-Screen Display
Turn on your TV when playing back an MP3 disc.
When the loaded MP3 disc is recognized, the following
on-screen display appears on the TV screen.
(The contents of this on-screen display vary according to
the disc — the way MP3 tracks were recorded on the
disc.)
Repeating Playback
On an MP3 disc, Repeat A B cannot be used.
You can enjoy only repeat play.
Press the Repeat button.
The indication corresponding to the selected mode
appears on the TV screen.
Button
To do
ENTER,
Start playback or go into a directory.
Select a track or directory.
/
CD-R/RW playback compatibility
Your DVD player can also play CD-R and
CD-RW discs recorded in digital audio format.
When recording your own CD-R or CD-RW
discs, make sure that the recording session is
properly terminated, or they will not be
playable. (Depending on disc properties and
recording quality, some CD-R/RWs may not be
playable.)
CD-RW has a lower reflection rate than CD-R
media and consequently it will take a longer to
read CD-R discs.
CD-RW discs recorded at high speed tend to
be difficult for the DVD player to read. If the
recording speed for the CD-RW disc is not
predetermined, write it at low speed.
Repeat
Each time you press the button, repeat mode
changes as follows:
REPEAT:RANDOM
: All tracks recorded on the disc will be played once in random order.
REPEAT:ONE
: Current track will be repeated.
REPEAT:DIR
: Tracks in the current directory will be repeated.
REPEAT:DISC
: All tracks on the disc will be repeated.
REPEAT OFF
: Repeat play is canceled.(Normal play is resumed.)
18

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-dm150

Table of Contents