Pioneer SGY-PM930H User Manual page 23

[Method 2] Switch the mode on SGX-
CA600
Do operations 1 to 5 described on
Page 16 to Page 17 , and go to
the mode switching screen.
1. If the left and right sensors
are checked, select [Dual
Power].
Switch to dual power meter mode
The mode switching completion
screen opens.
In this state, the cyclocomputer is still
not paired with the sensor. Refer to
Page 25 regarding how to pair.
If the mode cannot be switched,
remove the batteries from the left and
right transmitters and wait for more
than one minute. Place the batteries
back and do the same operation
again.
When the mode is switched, the LEDs
of the sensors light orange for 10
seconds.
EN
23