Auto Adjustment; Screen; Pc Display; Screen Pc Display - Samsung PS50B560T7W User Manual

Picture Options
Picture Reset
Option

Auto Adjustment

Screen

PC Display

Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual
screens on your PC will probably be different, depending upon your particular version
of Windows and your particular video card. However, even if your actual screens look
different, the same basic set-up information will apply in almost all cases. (If not, contact
your computer manufacturer or Samsung Dealer.)
1
First, click on 'Control Panel' on the Windows start menu.
2
When the control panel window appears, click on 'Appearance and Themes'
and a display dialog-box will appear.
3
When the control panel window appears, click on 'Display' and a display
dialog-box will appear.
4
Navigate to the 'Settings' tab on the display dialog-box.The correct size setting
(resolution)
Optimum: 1920 X 1080 pixels
If a vertical-frequency option exists on your display settings dialog box, the correct value is '60' or '60 Hz'. Otherwise, just If a vertical-frequency option exists on your display settings dialog box, the correct value is '60' or '60 Hz'. Otherwise, just
click 'OK' and exit the dialog box.
•
Side Grey: When you watch TV with the screen ratio
of 4:3, the screen is prevented from any damage by
adjusting the white balance on both extreme left and
right sides.
•
Dark: When you set the screen ratio to 4:3, it
darkens the left and right sides.
• Light: When you set the screen ratio to 4:3, it
brightens the left and right sides.
■ Reset Picture Mode / Cancel
Resets all picture settings to the default values.
•
Select a picture mode to be reset. The reset is
performed for each picture mode.
Picture (In the PC mode)
Description
Auto Adjustment allows the PC screen of set to self-adjust
to the incoming PC video signal. The values of fine, coarse
and position are adjusted automatically.
The purpose of picture quality adjustment is to remove or
reduce picture noise. If the noise is not removed by Fine-
tuning alone, then adjust the frequency as best as possible
(Coarse) and Fine-tune again. After the noise has been
reduced, readjust the picture so that it is aligned on the
center of screen.
■ Coarse
Adjusts the frequency when vertical noise appears on the
screen.
■ Fine
Adjusts the screen to be clearer.
■ PC Position
Adjust the PC's screen positioning if it does not fit the TV
screen. Press the▲ or ▼ Press the button to adjusting the
Vertical-Position. Press the ◄ or ► button to adjust the
Horizontal-Position.
■ Image Reset
You can replace all image settings with the factory default
values.
Brightness : 45
Sharpness : 50
Auto Adjustment
Screen
Advanced Settings
Picture Options
Picture Reset
■ Press the TOOLS button to
display Tools menu.
You can also set the
adjustment by selecting Tools
→ Auto Adjustment.
■ Preset: Press the SOURCE
button to select PC mode.
■ This function does not work in
DVI-HDMI mode.

►