Programming the Remote Control for Other Components
English - 66
Your TV comes equipped with a universal remote control. In
addition to controlling the TV, the universal remote control can
also operate a VCR, Cable box, DVD, and some Samsung Set-top
boxes (even if your VCR, Cable box and DVD are made by
manufacturers other than Samsung).
➢
The remote control might not be compatible with all
VCRs, DVD players, Cable boxes, and Set-Top Boxs.
1
Turn off your VCR (Cable box or DVD).
2
Press the MODE button to switch the remote control to the VCR
(CATV or DVD) mode.
➢
The remote control has five modes : TV, STB, VCR,
CABLE and DVD.
3
Press the SET button.
4
Enter 3 digits of the VCR (Cable box or DVD) code listed on the
next page for your VCR (Cable box or DVD).
Example: To enter code "6", press 0, 0, and 6.
To enter code "76", press 0, 7, and 6.
5
Press the POWER ( ) button. Your VCR (Cable box or DVD)
should turn on. If it turns on, your remote control is now set
correctly.
➢
If it does not turn on, repeat the steps above, but try one of
the other codes listed for your particular brand.
6
Once your remote control is set up, press the MODE button any
time you want to use the remote control to operate the VCR
(Cable box or DVD).
➢
◆ When your remote control is in STB, VCR, CABLE or
DVD mode, the volume buttons still control your
television's volume.
◆ When your remote control is in TV mode, the VCR or
DVD control buttons (rewind, stop, play/pause, and fast
forword) still operate your VCR or DVD.