Husqvarna Automower 105 Operator's Manual page 17

AppStore or GooglePlay. Once you have downloaded
the app, you can specify an e-mail address and a
password to create an account. You will receive a
validation e-mail to the e-mail address you specified.
Follow the instructions in the e-mail within 24 hours to
validate your account. If not validated within 24 hours,
you will have to create your account again. When the
account has been created in the app you can pair the
product and your smartphone.
4.5.4 Pair with Automower
Accessories > Automower Connect >
Select the function
Pairing > New pairing . When the app prompts you to do
so, enter the 6-digit code shown on the product display.
Also enter your chosen name of the product into the
®
app. Automower Connect is always connected to your
product as long as the mobile device have contact with
the mobile network and the product is charged and the
product is switched on.
4.5.5 Pair with Automower
Connect@Home
®
Activate Bluetooth wireless communication on your
smartphone. Select the function
Connect@Home > New pairing and follow the
instructions in the app. After pairing your product and
smartphone they will automatically connect each time
you get into range. If you want to connect to the product
without having an account you can still use Automower
Connect@Home by selecting Automower
start-up screen in the app.
4.6 Adjusting the cutting height
If the grass is long, let the product start mowing at the
MAX cutting height. Once the grass is shorter, you can
gradually lower the cutting height.
CAUTION:
During the first week after a
new installation, the cutting height must be
set to MAX to avoid damaging the loop wire.
After this, the cutting height can be lowered
one step every week until the desired cutting
height has been reached.
®
4.6.1 Automower 105
The cutting height can be varied from MIN to MAX. To
adjust the cutting height:
1. Push the STOP button to stop the product. Then
open the hatch.
2. Turn the height adjustment knob to the required
position. The selected position is indicated by the
orange column on the height adjustment indicator.
1418 - 007 - 17.09.2020
®
Connect
4.6.2 Automower
The cutting height can be varied from MIN to MAX in 9
steps.
1.
2.
®
Accessories >
®
® Direct in the
4.6.3 Automower
The cutting height can be varied from MIN to MAX in 9
steps.
1.
2.
3.
4.
5.
1 2 3
®
305/310/315/315X
Push the STOP button to stop the product and
open the cutting height adjustment hatch.
Turn the knob to the required position. Turn
clockwise to increase and counter-clockwise to
decrease the cutting height. The arrow aligns with
the selected position marked on the body.
305 310/315/315X
®
420/430X/440/450X
Push the STOP button to stop the product and
open the hatch.
Push the MENU button to access the main menu.
Move the cursor using the up/down arrow buttons
Cutting height .
to select menu
Push OK.
Increase/Decrease the cutting height with the
arrow buttons.
4 5
Operation - 17