Silvercrest SHMSB 300 A2 Operating Instructions Manual page 7

WARNING – RISK OF INJURY!
The appliance should always be disconnected from the mains
►
when not supervised and before assembly, disassembly or cleaning.
Do not touch the whisks, kneading hooks or the blender while the
►
appliance is in use. The blender blade is sharp! Do not dangle
long hair, scarves or the like over the mixing attachments.
NEVER attempt to fit attachments with differing functions at the
►
same time.
Unplug the appliance after every use and before cleaning to
►
prevent it from switching on inadvertently.
Always unplug the appliance before changing the accessories to
►
prevent it from switching on inadvertently.
Switch appliance off and disconnect from the power supply before
►
changing accessories or additional parts that move during operation.
Do not touch moving parts of the appliance, always wait for them
►
to come to a complete stop. Risk of injury!
Always check the appliance and all parts for signs of visible damage
►
before use. The safety concept can work only if the appliance is in
a faultless condition.
Never use the appliance if parts are damaged, defective or missing.
►
Doing so will increase the risk of accidents.
The appliance must always be supervised during use. If you need
►
to leave the workplace, remove the plug from the mains power
socket.
Never use the appliance for purposes other than those described
►
in these instructions. Otherwise there is a risk of serious injury!
Be careful when handling and cleaning the blender. The blade is
►
extremely sharp!
■ 4 │ GB │ IE │ NI │ CY
SHMSB 300 A2