Table of Contents
Advertisement
User Manual OPC UA Server / BACnet Master
Document code: MN67B31_ENG
Revision 1.000
Page 12 of 30
Industrial Electronic Devices
ETHERNET:
The Ethernet connection must be made using Connector3 of HD67B31-xxx-B2 with at least a Category 5E cable. The maximum length of the
cable should not exceed 100m. The cable has to conform to the T568 norms relative to connections in cat.5 up to 100 Mbps. To connect the
device to an Hub/Switch is recommended the use of a straight cable, to connect the device to a PC/PLC/other is recommended the use of a
cross cable.
ADFweb.com Srl – IT31010 – Mareno – Treviso
INFO:
www.adfweb.com
Phone +39.0438.30.91.31
Advertisement
Table of Contents
Need help?
Do you have a question about the HD67B31 Series and is the answer not in the manual?
Questions and answers