6B6 The Cookie Platform
The Cookie Platform will accumulate crumbs and edible ink overspray. Occasionally brush the
crumbs from the platter into the Crumb Catcher below. This will ensure that cookies are lifted
and moved properly and are level and in the correct position for printing. If more thorough
cleaning is necessary, disconnect power from the back of the printer. Remove the Cookie
Platform by lifting up slightly on the back of the platform and then pulling out. The Cookie
Platform can be placed in the dishwasher. It can withstand boiling temperatures of 212
degrees but it should be kept away from any heating elements near the base of the dishwasher.
Cleaning Frequency: Inspect/Clean Daily. Visually inspect the area if no crumbs or frosting is
visible cleaning is not required.
Pull
82
Grasp here. Lift
slightly and pull
Cookie Platform