[Al. 076_Load-Side Encoder Error] - Mitsubishi Electric MR-J5-G Series User Manual

[AL. 076_Load-side encoder error]

• There is an error in a parameter.
[AL. 076.2_Load-side encoder error 2]
Cause
1.
The values of the servo parameters for
manufacturer setting were changed.
[AL. 076.3_Load-side encoder error 3]
Cause
1.
The values of the servo parameters for
manufacturer setting were changed.
1 SERVO AMPLIFIER TROUBLESHOOTING
84
1.3 Handling methods for alarms/warnings
Check/action method
Restore the values of the servo parameters for manufacturer setting to the
initial values.
Check/action method
Restore the values of the servo parameters for manufacturer setting to the
initial values.
Model
[G]
[WG]
Model
[G]
[WG]