Download Print this page

Electric Radiators Direct Haverland RC Wave Instructions For Making Settings

Programming your Haverland RC Wave

Setting the temperature for each mode.

 Set Comfort mode to the desired temperature using + -

This is the mode to use when you need warmer heating e.g. morning and evening.

Recommended setting 18-21C

Then press the door icon to move to the next mode.

 Set the economy mode to the desired temperature using + -

This is the mode to use when you don't require as much heating e.g. afternoon or night.

Recommended setting 14-18C

Then press the door icon to move to the next mode.

 Set the frost mode to the desired temperature using + -

This is the mode to use when you don't require heating at all.

Press the door icon again to exit.

To enter the programming mode, hold the  standby button until the screen changes (5-10secs)

Press the  standby button again once.

The time will appear with numbers on the right hand side which will flash 1-7 (each number

represents a day. i.e. 1 is Monday, 2 Tuesday etc.) Set to the correct day using + -

Press the door icon to set the hour with +-

Press the door icon again to set the minutes with +-

Press the door icon to exit.

Table of Contents

Do you have a question about the Haverland RC Wave and is the answer not in the manual?

Page 1 Programming your Haverland RC Wave Setting the temperature for each mode.  Set Comfort mode to the desired temperature using + - This is the mode to use when you need warmer heating e.g. morning and evening. Recommended setting 18-21C Then press the door icon to move to the next mode.
Page 2 Programming your radiator schedule To enter the programming mode, hold the  standby button until the screen changes (5-10secs) It’ll start on 00:00 on Monday (1 on the right side) Select  economy mode by using + Press the door icon to go through the hours until you get to the hour which you require the heating to go on (e.g.