LG DLE4970 E Series Service Manual page 29

Test 8
Motor Assembly, DC, Pump
Caution
Trouble Symptom
Measurement Condition
* diagnostic test : go to page 23
Before measuring resistance, be sure to turn power off, and do voltage discharge.
(When discharging, contact the metal plug of power cord with earth line.)
During diagnostic test, E5 error occur.
Turn the dryer's power off, then measure resistance.
After activating the *diagnostic test, press
START/PAUSE button 4 times.
Is AD value displayed higher than 10 ?
Normal condition
YES
29
29
• Replace the
DC pump
NO