Pioneer CDJ-2000nexus Connection Manual page 9

Using Multi Players as
TRAKTOR Series Audio Output Devices
Set up the computer and TRATOR series in accordance with the following procedures.
When Using Windows®（Supported OS *:Windows 7、Windows Vista®、Windows XP）

1. Install the [Pioneer_CDJ_Driver] driver software into the computer.
Either install [Pioneer_CDJ_Driver] from the CD-ROM supplied with the Multi Player, or download the
latest edition from the following website.
(
http://pioneerdj.com/support/product.php?c=464&lang=en&p=CDJ-2000&t=91
2. Select [Pioneer CDJ ASIO] with the [File] → [Audio Setup] function on the TRAKTOR series.
3. The Multi Player will be automatically set up at the audio output device.
If the settings are not made automatically, set the necessary parameter manually with [File] →
[Audio Setup] → [Output Routing].
*Only 32-bit applications can be used with the driver software if a 64-bit operating system is in operation.

When Using Mac OS
It is not necessary to install the driver software. Set up the computers in accordance with the following
procedures if multiple Multi Players are to be used as audio output device.
Pioneer provides the Mac OS tool that helps setting up the procedures.
Download the CDJ_Aggregator from the support site below.
(http://pioneerdj.com/support/product.php?c=481&lang=en&p=CDJ-2000&t=91)
Unzip the downloaded file and follow the procedure below.
1. Connect the Multi Player (or players, if more than one are to be connected) to the computer with the
use of a USB cable.
2. Double click the CDJ_Aggregator, then Pioneer CDJ device set will be created.
3. Select the Device setting created with procedure 2 with [File] → [Audio Setup] on the TRAKTOR series.
4. The Multi Player will be automatically set up at the audio output device.
If the settings are not made automatically, set the necessary parameters manually with [File] →
[Audio Setup] → [Output Routing].
9
)