3. ASSEMBLY
3-15. Covers and work clamp mechanism
3771Q
3769Q
1. Attach the work clamp plates R (1) and L (2).
2. Attach the driving needle guard cover (3), the zigzag window cover (4), the top cover (5), the belt cover F (6), the
belt cover R (7), and the face plate (8).
3. Attach the needle (9).
3-16. Safety switch
3772Q
1. Switch to the input check mode.
2. Adjust the height of the safety switch (1) using the two screws (2) so that the LED does not go off even if the
machine head is lowered and the bed is shaken up and down.
47
RH-981A
3770Q
LED is lit.
3773Q