Troubleshooting - Electrolux ESL63010 User Manual

9.1 Cleaning the filters
B
9.2 Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
1. Turn the filter (A) counterclockwise
and remove it.
C
A
2. Turn the filter (A) counterclockwise
and remove it.
3.
To disassemble the filter (A), pull
A1
apart (A1) and (A2).
4. Remove the filter (B).
5. Wash the filters with water.
6. Put the filter (B) to its initial position.
A2
Make sure that it assembles correctly
under the two guides (C).
6. Assemble the filter (A) and put it into
position in filter (B). Turn it clockwise
until it locks.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
ENGLISH 13