Arrangement - Hitachi MP-JU4001 User Manual

Arrangement

Refer to the table T-1 to T-3 in Supplement (at the end of this manual) to
determine the screen size and projection distance. The values shown in the table
are calculated for a full size screen.
This projector will perform in a free tilt angle, as shown in the figures below.
Horizontal 360°
Install the projector away from walls or
other objects in a well-ventilated place.
Refer to the figures.
Installation position, picture mode,
altitude, and operating environment may affect the brightness of the display.
►Install
the projector
►Install the
projector
- Do not use any mounting accessories except the accessories specified by
the manufacturer. Read and keep the manuals of the accessories used.
- For special installation such as ceiling mounting, be sure to consult your
dealer beforehand. Specific mounting accessories and services may be
required.
- Do not put the
or is knocked over, it could cause injury and/or damage to the projector.
- Do not attach nor place anything on the
in the manual.
►Do not install the
►Do not place the
used.
►Do not place the product in a place where it may get wet.
The values may be different slightly.
Vertical 360°
WARNING
where you can access the power outlet easily.
in a stable position.
projector on its side, front or rear position. If the
near thermally conductive or flammable things.
projector
projector where any oils, such as cooking or machine oil, are
50cm or greater
unless otherwise specified
projector
9
Tilt 360°
(combination of
horizontal
and vertical)
projector falls
(continued on next page)