Download Print this page

Cleaning And Replacing The Air Filter - Hitachi MP-JU4001 User Manual

Hide thumbs

Advertisement

Cleaning and replacing the air filter

Check and clean the air filter periodically. When the indicators or a message
prompts you to clean the air filter, comply with it as soon as possible. The filter unit
is attached to inner side of the filter cover. If a filter of the filter unit is damaged or
heavily soiled, replace the whole unit with a new one.
Turn the projector off, and unplug the power
1.
cord. Allow the projector to sufficiently cool
down.
Use a vacuum cleaner on and around the filter
2.
cover.
Pick and pull up the filter cover knobs to take it
3.
off.
Use a vacuum cleaner for the filter, take the
4.
filter off.
Use a vacuum cleaner for the filter vent of the
5.
projector.
Use a vacuum cleaner for each part of the filter.
6.
If any part of the filter is damaged or heavily
soiled, replace the whole unit with a new one.
To purchase the new filter unit, inform your
dealer of the type number as follows.
UX44211
Put the filter back in an upright state into the
7.
projector.
Put the filter cover back into the place.
8.
Turn the projector on and reset the filter time using the FILTER TIME item
9.
in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▲/▼ buttons, then press the ► button.
A dialog will appear.
(3) Press the ► button to select "OK" on the dialog. It performs resetting the
filter time.
2
3
Filter cover knobs
4
5
17
Filter cover
Filter
Filter vent
(continued on next page)

Advertisement

loading

  Related Manuals for Hitachi MP-JU4001

This manual is also suitable for:

Mp-jw4001Mp-jw4011Mp-jw3501Mp-jw3511