Hitachi MP-JU4001 User Manual page 11

Connecting with your devices (continued)
►Use only the appropriate accessories. Otherwise it could cause a fire or
damage the projector and devices.
- Use only the accessories specified or recommended by the projector's
manufacturer. It may be regulated under some standards.
- Neither disassemble nor modify the projector and the accessories.
- Do not use the damaged accessory. Be careful not to damage the
accessories. Route a cable so that it is neither stepped on nor pinched.
►For a cable with a core at only one end, connect the end with the core to the
projector. That may be required by EMI regulations.
►Before connecting the
consent of the administrator of the network.
►Do not connect the LAN port to any network that might have the excessive
voltage.
►The designated USB wireless adapter that is sold as an option is required to use
the wireless network function of this projector.
►Before you insert or pull out the USB wireless adapter from the projector, turn
off the power of the
outlet. Do not touch the USB wireless adapter while the
AC power.
NOTE • Do not turn on or off the
unless that is directed in the manual of the device.
• Some input ports are selectable in the use. For details, see the Operating Guide.
(1)
• Be careful not to mistakenly connect a connector to a wrong port.
WARNING
CAUTION
projector to a network system, be sure to obtain the
projector and pull out the power cord's plug from the
projector
11
projector
while connected to a device in operation,
is receiving