Use your blender for soups, sauces,
drinks, pâtés, mayonnaise, dressings
Liquids should be allowed to cool to
room temperature before blending.
Switch off and unplug:
before fitting or removing parts
Keep hands and utensils out of the
blender when it's on the power unit.
Don't touch the sharp blades.
Never use a damaged machine. Get
it checked or repaired: see 'service
and customer care'.
Never use an unauthorised
Never leave the machine on
When removing the blender from the
wait until the blades have
don't accidentally unscrew the
goblet from the blade unit.
Never run the blender empty.
Always unplug your blender
when not in use.
Only operate the blender with the lid
Misuse of your blender can result in
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory or
mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision or
instruction concerning use of the
appliance by a person responsible
for their safety.
Children should be supervised to
ensure that they do not play with the
Only use the appliance for its
intended domestic use. Kenwood
will not accept any liability if the
appliance is subject to improper use,
or failure to comply with these
before plugging in
Make sure your electricity supply is
the same as the one shown on the
underside of the machine.
This appliance conforms to EC
directive 2004/108/EC on
Electromagnetic Compatibility and
EC regulation no. 1935/2004 of
27/10/2004 on materials intended
for contact with food.
before using for the first time
1 Remove all packaging.
2 Wash the parts: see 'cleaning'.
dual action locking lid
to use your blender
1 Fit the sealing ring - ensuring the
seal is fully located under the rim of
the blade unit. Leaking will
occur if the seal is damaged
or not fitted correctly.
2 Clip the blade unit into the base.
3 Screw the goblet onto the blade
4 Put your ingredients into the goblet.
5 Push the lid seal onto the underside
of the lid.
6 Fit and lock the filler cap in the lid,
by turning one position
7 Fit the lid to the goblet and turn
the filler cap to