Shandong Renke Control Technology RS-FX-N01 User Manual page 6

2.5 Installation
Flange-mounted wind direction sensors threaded flange firmly fixed to the lower portion of
the tube flange, the chassis Ø65mm, open Ø6mm four mounting
holes are circumferentially Ø47.1mm using only bolts to securely in the bracket On the whole set
of instruments, to maintain the best level, to ensure the accuracy of wind direction data, flange
connection easy to use, able to withstand greater pressure.
Attention to the installation, the direction of the aviation plug must be consistent with
the north direction, so as to avoid measurement errors.
2.6 Considerations
1. Never disassemble, but can not touch the sensor core, so as to avoid damage to the
product.
2. The device as far away from the interference power, in order to avoid inaccuracies in
the measurement, such as inverter, motor, installation, disassembly must disconnect the power
transmitter into the water cut-off can lead to irreversible changes in the transmitter.
3. Prevention of chemicals, oil, dust and other directly against the sensor, not the
condensation, long-term use in extreme temperatures to prevent thermal shock.
Shandong RenKe Control Technology Co.,Ltd.
Manual wind transmitter (485 type)
6 www.temperaturehumiditysensor.com