Fujitsu living home ACTIVY Media Player 150 User Manual page 105

Note: If, for security reasons, a Wireless Access Point does not display its
name, the ACTIVY Media Player cannot include this one in its list.
Go then to the point "Manually Enter SSID".
Select the SSID
Select the SSID (network identifier) used by
your wireless network. To select an SSID,
press the OK button when the SSID window is
highlighted. Use the up arrow and down
arrow buttons to navigate through the list.
Once you have highlighted the correct SSID,
press OK and press the down arrow button to
navigate to the Next button.
Manually enter the SSID
If the ACTIVY Media Player cannot locate the SSID for your wireless network
or if this is hidden, select <Manually Enter SSID>. You can then manually
enter the SSID via the on-screen keyboard.
Your WLAN settings
Your current wireless settings are based upon the SSID you entered above.
SSID
The SSID name selected on the previous
screen appears here. You can change the
SSID you selected here or enter one manually
by pressing OK when this field is highlighted.
The on-screen keyboard will be displayed (see
chapter 5.4). You can now enter the SSID.
Mode
You can choose from two different modes: Ad-
hoc and Infrastructure Mode. Ad-hoc is used for wireless peer-to-peer
networks that do not contain a router or a Wireless Access Point. You can use
it, for example, to connect your ACTIVITY Media Player directly with your PC.
Infrastructure Mode is used for networks with a Wireless Access Point or
router. To toggle between the two modes, press the OK button when the
Mode field is highlighted. The up arrow and down arrow can be used to
switch between the two options. Press OK again to select the mode.
Encryption
WEP (Wired Equivalent Privacy) and WPA (WiFi Protected Access) are
encryption technologies used by wireless devices. There are six options
which can be configured under this setting: Disable, 64bits-Hex, 128bits-Hex,
64bits-ASCII, 128bits-ASCII and WPA-PSK-TKIP. To toggle between the
options, press the OK button when the Encryption field is highlighted. The
up arrow and down arrow can be used to switch between the six options.
Press OK again to select an encryption option. Please note that the exact
same encryption method must be used on the ACTIVY Media Player 150
including the encryption keys
router.
ACTIVY Media Player 150
as is used on the Wireless Access Point or
19
COM