Technische Daten, Technical data, Données techniques, Datos téchnicos
Rallye MC
Netzanschluß, power supply,
tension d´alimentation,
alimentación eléctrica
Zug-/Schubkraft, force,
force de traction, fuerza de tracción
Mindesteinbauhöhe, headroom required
encombrement min. au plafond,
espacio min. requerido del techo a la
puerta
Antriebsmedium, drive mechanism,
entraînement, mechanismo de tiro
Antriebslänge gesamt, overall length,
longueur totale, longitud total
Gewicht approx., approx. weight,
poids approx., peso aprox.
Laufweg (3m Schiene),
max. door opening (3m rail) ,
longueur utilisée (rail de 3m),
recorrido de apertura (guía de 3m)
max. Torfläche (leichte Stahltore),
max.door size (light steel doors),
limite d´utilisation (portes standard
légègers), tamâno máx. de la puerta
(puertas estándar ligera)
Motorleistung, engine output,
puissance du moteur, potencia del motor
Rallye MC
Montage-Anleitung
Instructions Manual
45K
45Z
230 V
230 V
50 Hz
50 Hz
450 N
450 N
35 mm
35 mm
Kette, chain,
Zahnriemen, belt,
chaîne,
courroie
cadena
dentée, correa
3210 mm
3210 mm
16 kg
16 kg
2400 mm
2400 mm
2
2
6 m
6 m
110 W
110 W
-1-
Instructions de Montage
Instrucciones de Montaje
70K
70Z
230 V
230 V
50 Hz
50 Hz
700 N
700 N
35 mm
35 mm
Kette,chain,
Zahnriemen, belt,
chaîne,
courroie
cadena
dentée, correa
3210 mm
3210 mm
17 kg
17 kg
2400 mm
2400 mm
2
2
8 m
8 m
180 W
180 W
120K
120Z
230 V
230 V
50 Hz
50 Hz
1200 N
1200 N
35 mm
35 mm
Kette,chain,
Zahnriemen,
chaîne,
belt, courroie
cadena
dentée, correa
3210 mm
3210 mm
18 kg
18 kg
2400 mm
2400 mm
2
2
14 m
14 m
320 W
320 W
Artikel-Nr: B
190.013
03-2004
Need help?
Do you have a question about the Rallye MC 45K and is the answer not in the manual?
Questions and answers
The light on the remote control blinks the light of the receiver blinks but the door doesn't move. Is manageable only by the wall switch
If the remote control light and receiver light blink, but the door does not move and can only be operated by the wall switch, the issue could be related to the safety edge, photocell, or external switch connections.
Check the following:
1. Safety Edge or Photocell Connection (Terminal 1+2) – If the connection is not properly bridged or if a safety device is triggering a stop, the remote control may not function.
2. External Switch (Terminal 4.12 or 4.13) – Ensure that no external switch is stuck or malfunctioning, which could prevent remote operation.
3. Power Supply (+15V DC at Terminal 4.22) – Verify that the control board is receiving proper power.
4. Door Balance and Safety Mechanisms – If the door is not properly balanced or a safety issue is detected, the system may disable remote operation.
Try resetting the system or checking for any obstructions. If the issue persists, inspect the wiring and safety devices.
This answer is automatically generated
@Mr. Anderson
@marios The technician advised me to press auto learn button on receiver box of the garage door mechanism, and then press the button on the remote controller. Thus the remote controller will be reset. I did so, and it worked. I had to repeat the procedure for each remote controller of every inhabitant of the apartment building.