Camera Control Unit (Rear Panel) - Sony DXC-LS1P Instructions For Use Manual

Location and Functions of Parts and Controls

Camera Control Unit (Rear Panel)

1 GEN LOCK connector
2 Y/C connector
6 RS-232C connector
5 WE OUT connector
10
3 VIDEO OUT connector
4 DC IN/VBS
connector
7 DC IN connector
1 GEN LOCK (reference sync signal input) connector
(BNC-type)
Use this connector to make two or more cameras operate in
synchronization with a reference sync signal. An external
reference sync signal is input to this connector and is
synchronized with the VBS signal.
2 Y/C connector (S connector)
An image picked up by the camera is output as the Y/C
signal (luminance signal/chrominance signal). Connect to
the Y/C signal input on a monitor or VCR using a
connecting cable with a 4-pin DIN connector (not supplied).
3 VIDEO OUT (output) connector (BNC-type)
Outputs composite video signals.
4 DC IN (DC power input)/VBS (video output)
connector (12-pin)
Connect the CMA-D2CE camera adaptor (not supplied).
The power is supplied from the camera adaptor to this unit
and the video signal is output from this unit.
Note
Do not connect any equipment except the CMA-D2CE
camera adaptor to the DC IN/VBS connector.