Husqvarna FS 3500 G Operator's Manual page 27

Daily Maintenance
WARNING! Switch off the engine before
carrying out any checks or maintenance.
Check engine oil level without blade and the saw horizontal
for a flat saw level.
• Check the engine oil level.
• Make sure the level is between the limits.
max
min
Check blade guard for damage
• Check the blade guard for cracks.
• Never use a broken or damaged blade guard.
MAINTENANCE AND SERVICE
Check all hoses and clamps for damage or
looseness.
The image only shows some of the hoses and clamps.
• Look for leakage on fuel and hydraulics system. Tighten or
replace as necessary.
Check air cleaner restriction indicator.
• Check and clean the outer air filter if the air cleaner
indicator is red, remove the rear cover by opening the 2 air
filter housing clamps and pulling the housing off.
• A damaged air filter must always be replaced.
CAUTION! Unhealthy dust can be spread
during filter change. Wear approved
respiratory protection. Dispose of filters
correctly.
The filter must not be cleaned with
compressed air, this will damage the filter.
Filters can be vacuumed out for cleaning but
avoid hitting or dragging items across the
surface as this will damage the filter.
Do not use high pressure washing, this will
damage the filter.
A washed filter must be 100% dry before
being placed back onto the equipment.
Protection covers
• Make sure all protection covers are in place and in good
condition.
For more information, see the "Machine's safety equipment"
section.
– 27
English