Error condition — PAPER OUT
The media is not loaded or
The media sensor is not
The printer is set for non-
continuous media, but
continuous media is loaded.
The incorrect media sensor is
Z4Mplus and Z6Mplus User Guide
LCD Error Conditions and Warnings
Reload the media. See
Check the position of the reflective sensor.
See Position the Label Sensor on page 26.
Either load the correct media or set the
printer for the correct media type via the
Ensure that the printer driver or software
settings are correctly set.
Calibrate the printer (see
Via the front panel, locate the SENSOR
SELECT menu item
manually select the correct sensing
Load Roll Media