2.05
The duration is calculated automatically on the basis of
the maximum recommended load for each type of
fabric.
After the programme has started, the time remaining is
updated every minute.
Drying time
The selected drying time is displayed in minutes.
105
After starting the programme, the remaining time is
updated every minute.
Delayed start
The selected delay (24 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
DELAY
START
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed for
2 seconds.
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example
(see paragraph
E20
“Something not working”).
E20
End of programme
When the programme has finished a flashing zero is
displayed. The door can be opened.
0
If you have selected the Rinse Hold option, the zero will
not flash.
12 START/PAUSE button
This button has three functions:
Start - Pause - Draining of water / Spin.
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
Page 8