Something Not Working - Zanussi ZKH 2105 User Manual

Something not working

IMPORTANT!
Certain problems are due to lack of simple maintenance or oversights, which can be solved easily
without calling out an engineer. Before contacting your local Service Centre, please carry out the
checks listed below.
During machine operation it is possible that the red pilot light of the button
sounds and one of the following alarm codes appears on the display to indicate that the machine
is not working.
: problem with the water supply
E10
●
: problem with water draining
E20
●
: door open.
E40
●
Once the problem has been eliminated, press the button
checks, the problem persists, contact your local Service Centre.
Malfunction
The washer-dryer does not start:
The machine does not fill:
8
to restart the programme. If after all
Possible Cause / Solution
The door has not been closed.
• Close firmly the door.
The plug is not properly inserted in the power socket.
• Insert the plug into the power socket.
There is no power at the socket.
• Please check your domestic electrical installation.
The main fuse has blown.
• Replace the fuse.
The selector dial is not correctly positioned and the
8
button has not been pressed.
• Please turn the selector dial and press the button
again.
The Child Safety Lock or the Delay start function
option has been selected.
• Disable the «Child Safety Lock» or the «Delay
start» function.
The water tap is closed.
• Open the water tap.
The inlet hose is squashed or kinked.
• Check the inlet hose connection.
The filter in the inlet hose is blocked.
• Clean the water inlet hose filter.
The door is not properly closed.
• Close firmly the door.
8
flashes, the buzzer
E40
E10
E10
E10
E40
8
25