Problem Solving Guide - Miele HS07 Operating Instructions Manual

Problem solving guide

Many malfunctions and faults that can occur in daily operation can be easily
remedied. Time and money will be saved because a service call will not be
needed.
The following guide may help you to find the reason for a malfunction or a fault,
and to correct it.
Problem
The vacuum cleaner
switches off automatic-
ally.
Cause and remedy
A temperature limiter switches the vacuum cleaner off
automatically if it gets too hot.
This can occur if, for instance, large articles block the
suction tube or when the dustbag is full or contains
particles of fine dust. A heavily soiled motor protec-
tion filter or exhaust filter can also be the cause of
overheating.
 Always disconnect the vacuum cleaner from the
electrical supply for maintenance work and for
cleaning. Switch off at the wall socket and unplug
it.
After removing the cause, wait for approximately 20–
30 minutes to allow the vacuum cleaner to cool down.
It can then be switched on again.
en
43