Removal steps of the GPU board
Step
Screw (quantity)
2
M2 × 8 mm, flat-head, nylon-coated (4)
1220 System board
Important notices for handling the system board:
When handling the system board, read the following:
• The system board has an accelerometer, which can be broken when several thousands of G-forces are applied.
Note: Dropping a system board from a height of as little as 6 inches so that it falls flat on a hard bench can subject
the accelerometer to as much as 6000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or
composite.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
86
ThinkPad P15 Gen 1/T15g Gen 1 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)