A range of central hoods
guaranteeing a rational and versatile
solution to extraction problems over
appliances. The models detailed on
this sheet are two hoods, in static or
ventilated version, specific for
HOODS FOR HOOD TYPE DISHWASHERS
These hoods are specific for
Air intake through slots positioned
on the backside of the dishwasher.
The hoods are positioned onto the
wall not fixed on the hoodtype on the
backside of the dishwasher thus
guaranteeing an aesthetic continuity
with the machine itself.
Built in AISI 304 stainless steel.
Endowed with filter. The particular
deflector elements disposition forces
the intake air to change direction.
The advantages if compared with the
traditional wire filters are:
- easy cleanibility in dishwashers
thanks to the smooth surfaces
- constant efficiency thanks to the
never obstructed filtering surface
- higher safety as far as the never
obstructed filtering surface
eliminates any kind risk of fire.
Static model (KLC)
Suitable for centralized
Entirely built in AISI 304 stainless
The intake area is endowed with a
hood reducing the air outlet and
easing the connection with the
canalization of the centralized
Ventilated model (KLCV)
Incorporated electric fan
External dimensions - mm
Power - kW
Net weight - kg.
P R O F E S S I O N A L
automatically driven by an air flow
regulation system based on the
quantity of steam. These models
need a direct and indipendent air
expulsion to the outside.
Holding container for the fan
positioned on the top of the hood.
Entirely built in stainless steel
endowed with incorporated fan and
electronic regulation of the intake air.
The survey and intake zone have
inside an automatic humidity
detection system driven by an
electronic card wich detects humidity
on the exhaust air.
Fan capacity: approx. 2000 m3/h.