Summary of Operating Functions
Symbols in the sequence diagrams
Display of set value and possible adjustment for a new value.
When entering values make sure to enter the sign first!
ENTER key (importing of number)
Display output in large display (the measured value is displayed again after
approx. 3 s)
Function protected by code 1 (function level 1)
Function protected by codes 1 and 2 (function level 2)
Function protected by codes 1, 2 and 3 (function level 3)
Symbols in the display
The MEAS/CAL key must be pressed
Illegal code, illegal identifier, non-existent function number entered
Enter code according to function level
Current status of limit (upward violation)
Current status of limit (downward violation)
The input can be interrupted at any time using the CL key; the old values are then retained and the
system returns to the start of the function or partial function.