Zanussi ZCR135R Instruction Booklet

Zanussi instruction refrigerator zcr135r

Advertisement

Quick Links

REFRIGERATOR
ZCR135R
INSTRUCTION BOOKLET
8181454- -03/7

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi ZCR135R

  • Page 1 REFRIGERATOR ZCR135R INSTRUCTION BOOKLET 8181454- -03/7...
  • Page 2: Important Safety Instructions

    The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibillity, which is nevertheless flammable. Zanussi 818 14 54-03/7...
  • Page 3: Table Of Contents

    ........... . . Zanussi 818 14 54-03/7...
  • Page 4: Description Of The Appliance

    Use to switch on and set the desired temperature in the fridge. This appliance is designed to operate in ambient temperatures (surronding air temperature) between 10_C and 32_C. If these temperatures are exceeded i.e., colder or warmer, the appliance will not operate correctly. Zanussi 818 14 54-03/7...
  • Page 5: To Start The Fridge And Thermostat Control

    Meat, fish and milk should be put in the coldest part of the cabinet. The temperature will be affected by: · How often the door is opened · How much food is stored · Position of the appliance (See chapter Installation) Zanussi 818 14 54-03/7...
  • Page 6: Measuring The Temperature

    The dividing plate features a grille that can be opened and closed to control the amount of cold air entering the chiller compartment. When the grille is opened, the chiller compartment will become colder. Zanussi 818 14 54-03/7...
  • Page 7: Hints And Tips

    · Ensure there are no obstructions preventing the door from closing properly. · It is advisable to periodically clean the refrigeration system at the back of the appliance with a duster or vacuum cleaner. Zanussi 818 14 54-03/7...
  • Page 8: External Cleaning

    Discconnect the appliance from electricity supply. Empty all foods and clean the appliance, leaving the doors ajar to prevent unpleasant smells. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Zanussi 818 14 54-03/7...
  • Page 9: Something Not Working

    See "Normal operating Sounds" in chapter Hints and Tips. If the cushion spacers (between the cabinet wall and pipes) come loose, put them back in place again. Carefully follow the instructions in the chapter "Installing the cabinet". Zanussi 818 14 54-03/7...
  • Page 10: Service And Spare Parts

    5. The purchase date... Customer Care Department Fore general enquiries concerning your Zanussi appliance or futher information on Zanussi products, please contact our Customer Care Department by letter or phone at the address below or visit our website at www.zanussi.co.uk...
  • Page 11: Zanussi Service Force

    To contact your local Zanussi Service Center telephone MIDLANDS BIRMINGHAM 66 Birch Road East, (M18) Wyrley Road Ind Estate Witton Birmingham B6 6DB BOURNE Manning Road Ind (M44) Estate Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St. Mary's Street (M72)
  • Page 12 To contact your local Zanussi Service Center telephone CHANNEL ISLAND Guernsey Electricity PO Box 4 GUERNSEY Vale , Guernsey Channel Islands JERSEY Jersey Electricity Company PO Box 45 Queens Road St Helier Jersey Channel Islands JE4 8NY SCOTLAND ABERDEEN 54 Claremont Street...
  • Page 13: Guarantee Conditions

    The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. · All service work under this guarantee must be undertaken by a ZANUSSI SERVICE CENTRE. · Any appliance or defective part replaced shall become the company's property.
  • Page 14: Technical Specification

    * This figure is based on standard test resultd to the 595 mm European Standard EN153. Actual consumption will 1800 mm depend on how the appliance is used and where it is located. 600 mm 248 kwh/year 110 W 68 kg Zanussi 818 14 54-03/7...
  • Page 15: Installing The Cabinet

    The wire coloured brown must be connected to the terminal marked "L" or coloured red. Upon completion there must be no cut, or stray strands of wire present and the cord clamp must be secure over the outer sheath. 50mm Zanussi 818 14 54-03/7...
  • Page 16: Door Reversal

    Then press the supplied plastic plugs into the holes to which the handle was previously fitted. 8. Put the cabinet in position. Check that it stands straight. See the section "Positioning the cabinet". Zanussi 818 14 54-03/7...
  • Page 20 © Electrolux Household Appliances Limited 2000 MARIESTAD U-AV...

Table of Contents