Charging The Battery - Silvercrest SFW220 Quick Start Manual

˜ Charging the battery
Connect the plug of the
USB cable 10 to a free
USB port on your computer
or to a USB power adaptor.
Connect the charging
adaptor 10 to the charging
contact 5 on the back of
the product. The charging
adaptor is held in place
magnetically.
The product vibrates once at the start of the charging process.
When the battery is fully charged: Disconnect the USB cable 10 from the
product and from the USB port.
NOTES:
Make sure that the charging pins 8 correctly engage with the charging
contacts 5 .
The product turns on automatically as soon as it is connected with the
USB port.
The product cannot be operated during charging.
The charging status is shown in the display 2 .
A charging cycle on approx. 120 mA charging current takes approx.
2 hours.
26 GB/IE
5
10