3. Disassembly and Reassembly
3-1 Replacement of the Assy Top Plate
The Ceramic Glass may break if you use force especially on the edge.
Parts
Assy Top Plate
(Ceramic Glass)
3-2 Replacement of the Assy Control Panel
Parts
Assy Control Panel
Attention
Explanation Photo
Explanation Photo
double-faced tape
- 5 -
Explanation
1. Disconnect power.
2. Remove 4 - side direction 12 Screws
securing the Assy Top Plate to the Assy
Case Burner.
3. Raise the Assy Top Plate.
4. After replacement of the Assy Top Plate,
Screw the Assy Top Plate to the Assy Case
Burner.
Explanation
1. Lift up the Assy Touch PCB.
(Assy Touch PCB is fixed by double-faced
tape)
2. Disconnect all sub-wire.
3. Replace the Assy Touch PCB or Control-
Panel.