To Remove Cover Of Mains Terminal - Zanussi ZHQ 575 Instruction Booklet

INSTALLATION INSTRUCTIONS
TO REMOVE COVER OF MAINS
TERMINAL
From the rear of the appliance, remove mains input
terminal cover to gain access to terminal block.
·
First remove retaining screw with pozidrive
screwdriver. See Fig. 9.
·
Prise cover loose using screwdriver in position
(1) then lever off with screwdriver in position (2)
at either side. See Fig. 10.
·
Lift cover and remove screw from cable clamp.
See Fig. 11.
NOTES
Fig. 9
Fig.10
Fig.11
55