Conversion From Natural To Lpg Gas - Zanussi ZCM 700 X Instruction Booklet

Zanussi instruction booklet mixed fuel cooker zcm 700 x
Table of Contents

Advertisement

Conversion from Natural to LPG Gas

It is important to note that this model is designed for
use with natural gas but can be converted for use with
butane or propane gas providing the correct injectors
are fitted. The gas rate is adjusted to suit.
Method
• Ensure that the gas taps are in the 'OFF' position
• Isolate the hob from the electricity supply
• Remove all pan supports, burner caps, rings, crowns
and control knobs.
• With the aid of a 7mm box spanner the burner
injectors can then be unscrewed and replaced by the
appropriate Natural Gas injectors.
TO ADJUST THE GAS RATE
With the aid of a thin bladed screwdriver completely
tighten clockwise the by pass screw. Upon
completion stick the replacement rating plate near the
gas supply pipe.
IMPORTANT
The replacement/conversion of the gas hob should
only be undertaken by a CORGI registered engineer.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents