Technical Data; Installation - Electrolux EUT10001W User Manual

44 electrolux
Problem
It is too cold inside the
freezer
The appliance does not
work at all. Neither cool-
ing nor lighting works
The appliance does not
cool at all
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "In-
stallation".

Technical data

Dimension
Rising Time
The technical information are situated in the
rating plate on the internal left side of the ap-
pliance and in the energy label.

Installation

Read the "Safety Information" carefully
for your safety and correct operation of
the appliance before installing the
appliance.
Positioning
Install this appliance at a location where the
ambient temperature corresponds to the cli-
mate class indicated on the rating plate of the
appliance:
Possible cause
Temperature regulator may be
set incorrectly
Plug is not connected to the
mains socket properly
Power does not reach the appli-
ance
The appliance is not switched on Switch on the appliance
There is no voltage in the mains
socket (try to connect another
appliance into it)
Plug is not connected to the
mains socket properly
There is no voltage in the mains
socket (try to connect another
appliance into it)
The appliance is not switched on Switch on the appliance
Height
Width
Depth
Set a warmer temperature
Connect the mains plug properly
Try connecting another electrical
device to the power outlet
Call an electrician
Connect the mains plug properly
Call an electrician
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
EUT10001W
850 mm
550 mm
612 mm
22 h
Climate Ambient temperature
class
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Levelling
When placing the appliance ensure that it
stands level. This can be achieved by two
adjustable feet at the bottom in front (2). If
Solution
EUT10002W
850 mm
550 mm
612 mm
22 h