Technical Data - IKEA FINSMAKARE Manual

ENGLISH
Problem
The lamp does not operate.
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
Service data
If you cannot find a solution to the problem
yourself, contact an Authorised Service
Centre.
The necessary data for the service centre is
on the rating plate. The rating plate is on
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

Technical data

Technical data
Dimensions (internal)
Usable volumes
Area of baking tray
Possible cause
The lamp is defective.
There is an electrical fault.
You left the dish in the oven
for too long.
We recommend that you write the data here:
Replace the lamp.
• Turn off the oven with the
house fuse or the safety
switch in the fuse box and
turn it on again.
• If the display shows the
error code again, contact
an Authorised Service
Centre.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
the front frame of the oven cavity. Do not
remove the rating plate from the oven
cavity.
.........................................
.........................................
.........................................
Width
Height
Depth
43 l
1424 cm²
32
Remedy
480 mm
217 mm
411 mm