Care And Cleaning; Cleaning Materials; Cleaning The Outside Of The Appliance - Zanussi ZHF 470 Instruction Booklet

CARE AND CLEANING

Before cleaning the appliance always allow
the cooling fan for the controls to cool the
appliance down before switching off the
appliance.

CLEANING MATERIALS

Before using any cleaning materials on your
appliance, check that they are suitable and that their
use is recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives
should also be avoided.
CLEANING THE
APPLIANCE
DO NOT use abrasive cleaning materials or scourers
on the outside of the appliance as some of the
finishes are painted and damage may occur.
Regularly wipe over the control panel and oven doors
using a soft cloth well wrung out in warm water to
which a little liquid detergent has been added.
To prevent streaking on stainless steel models finish
with a soft cloth.
Any spillage on the stainless steel finish must be
wiped off immediately.
Stainless Steel cream cleaners are abrasive and
should be avoided as they may dull the surface
finish.
Do not attempt to remove any of the control
knobs from the panel as this may cause
damage and is a safety hazard.
OUTSIDE OF THE
25