Safety And Energy Saving Functions - Zanussi ZBS 963 Instruction Booklet

Zanussi instruction built-in oven zbs 963
Hide thumbs Also See for ZBS 963:
Table of Contents

Advertisement

To programme the Oven to switch
on and off
1) Carry out the "Cooking Duration" setting as described
in the relevant chapter.
2) Press button
until the "End of Cooking" function
will be selected and the relevant symbol will flash.
The control panel will display the end of cooking time
(that is, the actual time + cooking duration time - Fig.
14).
3) Press button " " to select the required end of cooking
time.
4) After the setting is carried out, the programmer will
wait 3 seconds and then start running.
5) The oven will switch on and off automatically. The
end of cooking will be marked by an acoustic alarm.
6) To switch off the acoustic alarm, press any button.
To cancel the programme, simply cancel the
Duration Time.

Safety and Energy Saving Functions

Safety Cut-Off Function
The oven will switch off automatically if any change of
setting is made, according to the table beside (Fig. 15).
If temperature setting is:
250°C
from 200 up to 245°C
from 120 up to 195°C
less than 120°C
Residual Heat Function
When a Cooking Duration time is set, the oven will
automatically switch off a few minutes before the end of the
programmed time, and use the residual heat to finish your
dishes without energy consumption. All current settings
will be displayed until the Cooking Duration time is over.
This function will not operate when the Cooking Duration
time is less than 15 minutes.
Child Safety Function
To avoid children switching on the oven, it is possible to
lock the oven controls.
1) Turn off the oven by pressing button
2) Press buttons
and " " at the same time and
keep them pressed for about 3 seconds. An acoustic
signal will be emitted and the indication 'SAFE' will
appear on the display (Fig. 16).
3) The oven is now locked. Neither oven functions nor
temperatures can be selected.
To unlock the oven:
Press buttons
and " " at the same time and keep
them pressed for about 3 seconds. An acoustic signal will
be emitted and the indication 'SAFE' will go off. The oven
can now be operated (Fig. 17).
10
the oven will switch off:
after 1
/
hours
1
2
after 5,5 hours
after 8,5 hours
hours
after 12
.
B
Fig. 14
B
Fig. 15
B
Fig. 16
B
Fig. 17

Advertisement

Table of Contents
loading

Table of Contents