Spike Solo Product Manual
  1. Manuals
  2. Brands
  3. Spike Manuals
  4. Brewing Systems
  5. Solo
  6. Product manual

Spike Solo Product Manual

Hide thumbs Also See for Solo:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Spike Solo Product Guide
CONTENTS:
• Page 7: Hoses

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Solo and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Spike Solo

Summary of Contents for Spike Solo

  • Page 1: Table Of Contents

    Spike Solo Product Guide CONTENTS: • Page 1: Brewing Control Panel • Page 2: Kettle • Page 3: Basket • Page 4: Assembly • Page 5: Wort Chiller • Page 6: Pump • Page 7: Hoses...

  • Page 2: Brewing Control Panel

    BREWING CONTROL PANEL Autotune your HLT PID An ‘Autotune’ needs to be performed prior to your first brew day. The PID will calibrate itself to give the most efficient and accurate heating. You only need to do this for your PID before your first brew and then it’ll be set.

  • Page 3: Kettle

    KETTLE ITEM DESCRIPTION MNPT x QC Fitting 3pc Ball Valve 5/8” Quick Connect Fitting Side Pickup Tube PRO TIPS: Heating Element • All threaded NPT fittings require pipe tape for a leak free seal. You’ll want to put 3-4 wraps of pipe tape on the threads in a clockwise direction. If your 1.5”...

  • Page 4: Basket

    BASKET ITEM DESCRIPTION MNPT x QC Fitting 5/8” Quick Connect Fitting Side Pickup Tube Mash Recirculation Hose...

  • Page 5: Assembly

    ASSEMBLY PRO TIP: • The basket hangs on the kettle lip using the two welded basket hangers. ITEM DESCRIPTION Basket Assembly Kettle Assembly...

  • Page 6: Wort Chiller

    WORT CHILLER ITEM DESCRIPTION Quick Connect Fitting - MQC x MNPT Hose Barb Hex Nipple PRO TIP: T-Fitting • If you have high ground water temps we recommend submerging Temperature Probe your chiller in an ice water bath for the last leg of chilling.

  • Page 7: Pump

    PUMP PRO TIP: • The pump can be rotated in 90° increments as needed. To rotate the pump head, remove the four screws, rotate the head, then tighten the screws. ITEM DESCRIPTION FNPT x QC Fitting 3pc Ball Valve Pump Pump Head Screws...
  • Page 8 HOSES (2) 4’ (1) 2’ ITEM DESCRIPTION FQC x Barb PRO TIP: Hose - 4’ • To avoid needing hose clamps, we use oversized barbs so the silicon tubing Mash Tun Recirculation Hose - 2’ will be securely attached and creates a full port which doesn’t restrict flow.

Table of Contents