Download Print this page

Pioneer G-9 Series Firmware Update Procedure page 2

Advertisement

Number of Orange
LED flashes
2
3
5
10
NOTE ABOUT TELEVISION CHANNELS:
If you are using the television's built-in tuner to view television channels (as opposed to using the set top box or other device), please
complete the additional steps below. Refer to the unit's Operating Instruction for complete procedure on how to Create the List of TV
Channels.
Once the firmware update is completed, please re-scan the television channels by doing the following:
1. With the television on, press the Home Menu button on the remote control.
2. Press the Down arrow button to select "Setup" and press the Enter button.
3. Press the Down arrow button to select "System Setup" and press the Enter button.
4. Select "Auto Installation." Then, press the Enter button.
5. Select an option
- Signal type: "Air" or "Cable"
- Language: "English", "Francais", or "Espanol"
- Time Zone: "Atlantic", "Eastern", "Central", "Mountain", "Pacific", "Alaska", or "Hawaii"
6. Select "Start" and press the enter button. The panel automatically begins creating your list of TV channels.
Open Source Notice:
The software programs used on these products include the Linux operating system, BusyBox, and other components licensed for use
based on the terms of a GNU General Public License or Lesser General Public License. You may obtain a machine readable copy of
the corresponding source code for the cost of distribution by contacting Pioneer's Customer Service Center (in the U.S., 1-800-421-
1404). Pioneer service representatives are available Monday through Friday, 10:00 a.m. to 7:30 p.m. (Eastern Time), except on
holidays. Details of the GNU GPL and LGPL can be found at the GNU website (http://www.gnu.org).
Error
Version comparison error
USB Download startup error
USB Download ends with error
Disconnect of USB
Description
The same or later version of software
has already been written.
USB Download can not be started
USB Download is aborted during downloading.
Suggest to try it again.
USB Flash Drive failure
Pioneer Electronics (USA) Inc
CRM Div, SE Depart
Date : 02/23/2011 Rev: PSE9GFW1.9

Advertisement

loading

This manual is also suitable for:

Pdp-5020fdPdp-6020fdPro-151fdPro 111fd - 50" plasma tv