Electronic Programmer - Zanussi U33008 ZOB 330 User Information

Electronic programmer

5
6
2
Fig. 4
The oven will only work if the time of
day has been set.
However, the oven can also be operated
without any programme.
Setting the time of day
When the power supply is switched on, or after a
power failure, the "Time of day" pilot lamp
flash on the display.
To set the correct time of day:
1. Press button " " or " ".
2. After the setting is carried out, wait for 5
seconds: the "Time of day" pilot lamp
go out and the display will show the set time.
The appliance is ready for use.
To reset the correct time of day:
1. Press button repeatedly to select the "Time
of day" function. The relevant pilot lamp will
start flashing. Then proceed as described
above.
The time of day can only be reset if no automatic
function (cooking duration
cooking ) has been set.
10
4
1 3
or end of
1. Push button for selecting a function
2. Decreasing control button " "
7
3. Increasing control button " "
8
4. Display
5. "Cooking Duration" pilot lamp
6. "End of cooking" pilot lamp
7. "Minute minder" pilot lamp
8. "Time of day" pilot lamp
In the event of a power failure, all the
settings (time of day, programme setting or
programme in operation) will be cancelled.
When the power is restored, the numbers
in the display will flash, and the clock/timer
has to be reset.
will
will