Download Print this page

Zanussi 1800 Technical Data

1400 & 1800 mm work tables with bowl.
Hide thumbs
   

Advertisement

RANGE
COMPOSITION
The range consists of 4 models of
work tables with upstand and a bowl
positioned on the right or left hand
side, 1400 or 1800 mm in length.
The highly modular design of the
tables guarantees a rational solution
to any food preparation or support
function in the professional kitchen.
Upstand with 8 mm radioused
corner, 100 mm high and 13 mm
deep, designed to be used against a
wall.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
The 40 mm high worktop in 304
AISI stainless steel, 10/10 in
thickness, incorporates a layer of
sound deadening material, has
upturned edges to protect the
kitchen worker and a reinforced,
waterproof under panel.
Square section legs and 1"
height-adjustable feet (40 mm) in
304 AISI stainless steel to allow
perfect alignment with other food
preparation equipment.
The single-pressed bowl (400 x
400 x 200 mm) is supplied as
standard with an overflow pipe and
drain hole.
Ease and speed of installation
guaranteed by the fact that the table
top slots into the legs without using
screws.
All work tables can be fitted, as
optional extras, with a single drawer
either 400 or 600 mm wide, a chest
of 4 drawers either 400 or 600 mm
WORK TABLES WITH BOWL
wide, a lower shelf, a three sided
underframe and a set of castors as
an alternative to the feet. Different
taps are avialable to suit every need.
The drawers, in 304 AISI stainless
steel with a one-piece interior and
rounded corners for greater hygiene
and ease of cleaning, are designed
to contain GN containers with a
maximum height of 100 mm. They
have a maximum load capacity of 40
kg.
The lower shelf, 40 mm in
thickness, slots easily into place,
without the use of tools, at a height
TECHNICAL DATA
CHARACTERISTICS
External dimensions - mm
width
depth
height
Worktop thickness - mm
Upstand dimensions - mm
height
depth
radius
Bowls - n.
Bowl dimensions (wxdxh) - mm
Net weight - kg.
1400&1800 mm
of 200 mm from the floor. Smooth
shelves are normally supplied,
perforated ones are available on
request. For installation of the chest
of drawers the lower shelf must be
ordered as well.
All models comply with the more
strict international standards as far
as hygiene and cleanability are
concerned.
MODELS
TL1410DXP
TL1410SXP
132300
132301
1400
1400
700
700
1000
1000
50
50
100
100
13
13
R=8
R=8
1
1
400x400xH200 400x400xH200 400x400xH200 400x400xH200
45
45
Model 132200+855300
ZANUSSI
P R O F E S S I O N A L
TL1810DXP
TL1810SXP
132306
132307
1800
1800
700
700
1000
1000
50
50
100
100
13
13
R=8
R=8
1
1
54
54

Advertisement

   Related Manuals for Zanussi 1800

   Summary of Contents for Zanussi 1800

  • Page 1

    The range consists of 4 models of work tables with upstand and a bowl positioned on the right or left hand side, 1400 or 1800 mm in length. The highly modular design of the tables guarantees a rational solution to any food preparation or support function in the professional kitchen.

  • Page 2

    HWI - Hot water inlet OPTIONAL ACCESSORIES ACCESSORIES 3-SIDED UNDERFRAME FOR 1400 MM TABLES 3-SIDED UNDERFRAME FOR 1800 MM TABLES CHEST 4 DRAWERS (S/S RUNNERS) 600 MM CHEST 4 DRAWERS(S/S RUNNERS) GN1/1 400MM DRAWER (GALVANIZED RUNNERS) 600 MM DRAWER (GALVANIZED RUNNERS) GN 1/1 400MM...

This manual also for:

132300 132301 132306 132307 Tl1410dxp Tl1410sxp... Show all

Comments to this Manuals

Symbols: 0
Latest comments: