Assembly - Husqvarna 325iLK Operator's Manual

SAVE THESE
INSTRUCTIONS
To assemble the loop handle
1. Attach the loop handle onto the shaft between the
arrows. Do not place loop handle or suspension ring
on label.
2. Move the spacer into the slot of the loop handle.
3. Attach the nut, the knob and the screw, do not make
it to tight.
4. Adjust the product to a comfortable position.
5. Tighten the bolt.
To assemble the two-piece shaft
1. Turn the knob to loosen the coupling.
10

Assembly

2. Align the tab (A) with the arrow (B) on the coupling.
3. Push the shaft into the coupling until it clicks into
position.
4. Tighten the knob fully.
B
A
1386 - 002 - 04.12.2019