Water Supply - Zanussi ZCOF 637 X Instruction Manual And Installation Instructions

WATER SUPPLY

Take the lid off the water tank (ref.27) and take out
the Brita filter.
Take the filter out of the packaging and soak it in
cold water for half an hour before fitting it firmly
into the hole in the tank (fig.6).
Place the water hose in the relative channel (fig.7)
and push it down until it reaches the bottom of the
tank (fig.8).
Fill the tank with cold water.
Warning: fill the tank with cold drinking water
only: do not pour milk or any other liquid into the
tank!
The Brita filter is available at shops selling
household appliances, at our Technical Service
Centres and at Authorised Spare Parts outlets.
Fig. 7
Fig. 6
Fig. 8
67