Something Not Working - Zanussi ZDE 57140W User Manual

20 electrolux something not working

Something not working

Certain problems are due to lack of simple maintenance or oversights, which can be
solved easily without calling out an engineer. Before contacting your local Service
Centre, please carry out the checks listed below.
During machine operation it is possible that the Start/Pause pilot light flashes to
indicate that the machine is not working.
Once the problem has been eliminated, press the Start/Pause button to restart the
programme. If after all checks, the problem persists, contact your local Service
Centre.
Malfunction
Dryer does not work.
Drying results
unsatisfactory.
Loading door does not
close.
Possible cause
Mains plug is not plugged in
or fuse is not working
correctly.
Loading door is open.
Have you pressed the
Start/Pause button?
Wrong programme selected.
Lint filter clogged.
Incorrect volume of laundry.
Ventilation slots in base area
covered up.
Residue on inside surface of
drum or drum ribs.
Fine strainer not in place
and/or large mesh filter not
locked in place.
Solution
Plug in at mains socket.
Check fuse in fuse box
(domestic installation).
Close loading door.
Press the Start/Pause button
again.
Select a different programme the
next time you dry (see "Overview
of programmes" section).
Clean lint filter.
Observe recommended
loading volumes.
Uncover ventilation slots in
base area.
Clean inside surface of drum
and drum ribs
Install fine strainer and/or
snap large mesh filter into
place.